• Sharjah Chemical, Sharjah
  • Leading Provider

    Of Marine Chemical Solutions

  • Leading Provider

    Of Marine Chemical Solutions

Product Details

Home Product Details

Request For Quote





Product Search

Slop Oil Breaker 25 Ltr

Chembreak Emulsion Sludge Breaker 20 Ltr
25.00Ltr.

Product Enquiry
SKU: RXSOL-20-2006-020 Category:

Product Description

RXSOL-20-2006-020  has the unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker “C” cleaners.
 


 

Product Technical bulletin

Chem Break Rx ORG-RXSOL-20-2006-020 ( SLUDGE BREAK )

For Engine Room & Cargo Tank Cleaner

Product Description:- RXSOL-20-2006-020 is an all purpose degreaser  emulsifiers, It is an excellent blend of powerful solvent base and emulsifying inorganic products .Specially designed  for engine room and cargo  tank cleaning .Main feature of RXSOL-20-2006-020 is, it finally dissociate slop emulsion  to separate oil and water .This provide us with ability to dispose of waste solution as per MARPOL & IMO rules and regulation .

Dosage:- Dose rate and results will vary depending on amount of contamination . For light contamination dilution with water up to 1:20 is recommended where as medium contamination dilution with Petro solvent , And for heavy contamination neat RXSOL-20-2006-020 is suggested to use.

Procedure of use :- RXSOL-20-2006-020 is  recommended for local cleaning & degreasing of engine rooms, bilges & tank  tops. It may be applied by brush, spray, immersion, soaking, or  any  other  conventional  means.RXSOL-20-2006-020  is used  neat. Allow a residence time of at least 20- 45 minutes where  possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed  to separate  in a holding tank for atleast 3-5 hours before passing through an oily water separator.

Tank Cleaning after Mineral Oils/ Lube Oils / Slope-Black Oil
1 ) Fill the tank with 1-35 litres per ton wash water.Best results are obtained when water is heated to a   temperature  between  65°C & 80°C  then  stripped  constantly and transferred  to a holding  tank  for  separation.The time for this will vary depending on amount of RXSOL-20-2006-020  used & nature of oil being cleaned.Generally,12 hours should be sufficient before the water phase can be removed.
2) Direct Cleaning.Spray directly RXSOL-20-2006-020 on tank surfaces to be cleaned, left  for at least 30  minutes.Finally wash with hydrogating (high pressure) machine. Hot water between 50°C & 80°C recommended.

Product Properties:-

Appearence           

Clear (Raw material depended colour of the effectively  will , however not be impaired .)

 

Density                   

In g/cm3 at 15°C: 0.93

 

Flash Point           

(PMCC)°C: Above 66

 

Compatibility  

 

 

Metal                            

No known effect

 

Rubber                       

Do not use with natural rubber compounds

 

Synthetic Rubber      

May swell

 

Packaging         

Order No

Size (in Litres)

 

RXSOL-20-2006-020

25 , 35 , 210

Characteristics:-

High penetration & emulsification   , Reduces down time.
Low toxicity, non -corrosive. Highly effective, economical solvent cleaner.
For cleaning of machinery parts, bulk heads, decks, bottom plates & any oil/grease dirty areas.
Used for cargo tank cleaning of mineral oils and petroleum based chemicals .

 

Product label
RXSOL-20-2006 has the unique feature that dissociates slop to seperate oil and water. This product is formulated to meet the ever changing regulations for the treatment of tank cleaning waste water after using petroleum based solvents, and Bunker “C” cleaners.

X

Request for Quote and Get Heavy Discount on Price