POLYMER MODIFIED BITUMEN SEALER ( Concrete Treatment ) RXSOL PMB 1807

Product Description

New generation polymer blend bitumen solution containing anti-stripping agents suitable for brushing and designed to seal porous surfaces. It can resist low concentrations of acids & alkalies and also prolonged oxidation. When dry it forms a black shiny coating. 

Its coat on surace gives effective waterproof, weatherproof, corrosion resistant protective coating. It is suitable for application to a wide variety of surfaces including iron and steel, asbestos cement, concrete, stone and brick, and is mainly used for: 

Providing a protective coating for concrete structures, stone, brick, concrete screeds and sand cement surfaces. It is useful for the protection of underground foundations of civil structures,etc from the attack of dissolved ions like sulphates, chlorides etc. 

Product Technical bulletin

GENERAL 

New generation polymer blend bitumen solution containing anti-stripping agents suitable for brushing and designed to seal porous surfaces. It can resist low concentrations of acids & alkalies and also prolonged oxidation. When dry it forms a black shiny coating. 

Its coat on surace gives effective waterproof, weatherproof, corrosion resistant protective coating. It is suitable for application to a wide variety of surfaces including iron and steel, asbestos cement, concrete, stone and brick, and is mainly used for: 

Providing a protective coating for concrete structures, stone, brick, concrete screeds and sand cement surfaces. It is useful for the protection of underground foundations of civil structures,etc from the attack of dissolved ions like sulphates, chlorides etc. 

INSTRUCTIONS FOR USE 

Cleaning of surafece will increase bonding strength as well as consumption of paint will be less.

As with all surfaces coatings, preparation of the surface is of great importance and will influence the degree of adhesion obtained and the life of the coating. The surface should be sound, stable and clean. RXSOL BITUMEN 1807 is to be applied cold by brush. Slight dampness of the surface can be tolerated but it should not be wet. Do not apply under rainy or frosty conditions. 

COVERAGE
1 kg of IMPREGNSOL BLACK covers approximately 50 to 60 sq.ft. 

per coat. May vary depending on the nature of the surface. 

PACKING 

20,210 Kgs in HDPE / MS containers. 

STORAGE & SHELF LIFE 

It has a shelf life of 12 months when stored in original packing in a cool, dry place. 

Product label