One Shot Universal Liquitreat 20 Ltrs

Product Description

It is a well – balanced blend for boiler water treatment products, resulting in a scale and corrosion control by one shot operation. A powdered one-step treatment to control the formation of rust and scale in low pressure and auxillary boilers with working pressure up to 20 bars.

Product Technical bulletin

BOILER WATER TREATMENT 

UNIVERSAL–ONE SHOT (RXSOL-50-5001-020)

Product Description:-RXSOL-50-5001-020  is a well-balanced blend for boiler water treatment, resulting in a scale and corrosion control by one simple operation.

Function Mechanism:

Alkalinity Control:-This components of RXSOL-50-5001-020 chemically  precipitate  the hardness of salts like Calcium & Magnesium & neutralizes the acidic conditions.

Hardness Control:-RXSOL-50-5001-020  provides phosphate reserve  to effectively  react with  and precipitate the hardness salts introduces with the feed water.

Sludge Conditioner:-RXSOL-50-5001-020 component  will preventing the sludge from  adhering to metals surfaces. Boiler sludge can only be removed by blow down.

Oxygen Scanvangers:-Catalyzed  liquid of RXSOL-50-5001-020 controls  the formation of  oxygen to protects boiler & steam line corrosion protection. As an  additional benefits it will assist to neutralize dissolved carbon dioxide. In this way  RXSOL-50-5001-020 preventing oxygen “Pitting” corrosion.

Application , Dosage:- RXSOL-50-5001-020  is strongly alkaline. RXSOL-50-5001-020 is best applied neat or diluted with any con –venient  strength on a continuous  basis using a  suitable chemicals pump . The product  should be applied to the boiler feed tank or feed line to ensure adequate  mixing. The dosage rate of   RXSOL-50-5001-020 is dependent on boiler operating condition, Feed 2-3 Ltrs of RXSOL-50-5001-020  solution for per thousand Ltr of boilers water Then control  the  system by  Periodic Alkalinity  test procedure.  If  p-Alkalinity is below 200  ppm  increase the  ratio of  RXSOL-50-5001-020  solution. If  p-Alkalinity  is above  400 ppm  reduce  the  concentration of  RXSOL-50-5001-020  solution by dilution with water.

Control Procedure:- Control is by simple  boiler water tests or RX CLEANSERS  can provide a suitable test  kits for this purpose.

Product Properties:-

Characteristics:-

• Convenient liquid treatment, which provides the basic alkalinity on which successful water treatment depends.
• Provides optimum conditions for hardness control to function.
• Neutralizes acid conditions.
• Will assist in keeping silica in suspension.
• Simple test to determine level of treatment.
• Can be used in boilers of all pressures.
• Can be used as a neutralizer after acid cleaning operations.
• Suitable for use with all auxiliary boilers; waste heat units; economizers, package boilers, smoke and water tube boilers.
• Dispersant action suspends sludge and sediment particles for efficient blow down.
• Oxygen scavenging for optimum protection.
• Protects boiler, steam lines, condensate lines and feed water lines from corrosion.
• Fast action due to catalyst.
• Simple test to determine level of treatment.

Packaging, Handling, First Aid & Storage:-

RXSOL-50-5001-020 is generally supplied in drums containing 25 / 210 Ltrs. Avoid contact with skin and eyes wear goggles & PVC gloves when handling. Keep an eye wash bottle close to the point of use. Do not  take internally.On contact with Skin/Cloth, wash immediately with cupious amount of water. If eyes are affected they should be washed with water for at least 15 Minutes and medical attention sought  immediately. If swallowed do not induces vomiting give plenty of water and call doctor immediately.

                                                         **Keep drums tightly closed when not in use.** 

Product label
RXSOL-50-5001-020
It is a well – balanced blend for boiler water treatment products, resulting in a scale and corrosion control by one shot operation.
The dosage rate is dependent on bioler operating condition, feed 2-3 ltrs of RXSOL-50-5001-020 solution for per thousand ltr of bioler water then control the system by periodic Alkalinity test procedure. If p-Alkalinity is below 200 ppm increase the ratio of rxsol BWT 5001 solution. If p-Alkalinity is above 400 ppm reduce the concentration of RXSOL-50-5001-020 solution by dilution with water. RXSOL-50-5001-020 is strongly alkaline.RXSOL-50-5001-020 is best applied heat or diluted with any convenient strength on a continuous basis using a suitable chemicals pump. The product should be applied to the boiler feed tank or feed line to ensure adequate mixing.