Oil Spill Remover 25 Ltr

Product Description

The RXSOL-17-1058-025 is the new, 3rdgeneration dispersant which is the latest water and Surface Active Agent  based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers or hoses using an injector.

This product is specially designed for complete emulsification of oil by which subsequent dispersion takes place.

Product Technical bulletin

OIL SPILL DISPERSANT TYPE – II

RXSOL-17-1058-025

Product Description :-
RXSOL-17-1058-025Emulsifier based product with excellence efficiency and low toxicity with superior penetrating & surface active agents . This product is specially designed for complete emulsification of oil by which dispersion takes place AREA : At SEA , at shore either in port or off board , FOR INDUSTRIAL PURPOSE.

PROCEDURE-OF-USE :-           

OIL-SPILLS-AT-SEA :-
Rxsol OD1012 is used concentrated by direct spraying to clean up oil spills at sea.It can be applie  by hand spray, work boats with mounted spray booms,or fire hoses with injectors. Allow some time for the oil to absorb the RXSOL-17-1058-025 & then disperse mixture by vigorous agitation using  Fire hoses,Ship’s propeller, Breaker boards towed  behind work boats ,etc

OIL-ON-BEACHES-AND-SHORE-LINE :-
RXSOL-17-1058-025 should  be applied  neat by spraying over oiled areas. Allow time for the oil to  absorb  the DISPERSANT then follow by washing down the beach or rocks, etc. The treatment  rate  depends on the  nature  and  thickness of the oil spill, also on  the age and condition. Under conditions where it is a thin slick of oil, 1 litre of  RxsolOD1012 WB is enough to treat approximately 20-30 Sq.M of oil. In many cases, several applications  may be necessary. (Depends on the size of contamination in the affected area)

OIL-SPILL-ON-DECK :-
Remove as much of the oil as possible, then spray RXSOL-17-1058-025  over area covered by the oil  &  allow some time for it to be absorbed. Disperse the mixture with water by means of a fire hose Depending on type of oil it may be necessary to use several applications.

Product Properties :-

Characteristics :
Biodegradable and having low toxicity . Self –life 5 YEARS( FROM MANUFACTURING DATE ) HIGH – EMULSIFICATION rate Converts hydrocarbons particle  in to  very fine emulsions.Ready to use product. Suitable for Crude  / Bitumen / Residual  / Diesel / Kerosene, White spirit  & Lube oils etc.Effective  on oil spills at platefoprm, during loading or discharging of  cargo  or bunkers .For cleaning of spills on Deck, Ships side, Piers, Wharfs, etc. where allowed.
 

Product label
Surface Active Agent based formulation oil spill dispersant with no flash point, non toxic and free from petroleum distillate and soluble in sea or fresh water.use as Type II . It can be used concentrated or diluted to a ratio of 1:10 depending on the contamination level. It is an efficient and environmental friendly product containing no hydrocarbons. It has been specifically designed for oil dispersion at sea, it can be applied by spray from booms on work boats, hand sprayers