• Sharjah Chemical, Sharjah
  • Leading Provider

    Of Marine Chemical Solutions

  • Leading Provider

    Of Marine Chemical Solutions

Product Details

Home Product Details

Request For Quote





Product Search

NITRIC ACID 68-72% 50 Ltrs

Extra pure NITRIC , removes iron residue & forms an oxide layer that boosts the corrosion resistance of the stainless steel intended to improve the corrosion resistance
Kg.(Liq)0

Product Enquiry
SKU: RXSOL-20-1106-050 Category:

Product Description

Product Technical bulletin

Product Name : RXSOL-19-1106-060
Product Type : NITRIC ACID (68-72% passivation liquid)-III

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone : +91 22 65113333 / 5555 / 9999 / 27611360
Fax : +91 22 2781 1318 :::AOH :0091 9821214367
Email : mail@rxmarine.com

Chemica Name CAS # % by weight
NITRIC ACID 7697-37-2 70.0-       78.0
WATER 7732-18-5 30.0-       40.0

Eye   Can cause permanent eye injury.  Symptoms include stinging,         
tearing, redness, and swelling of eyes.  Can injure the cornea and  
cause blindness.
Skin   Can cause permanent skin damage.  Symptoms may include redness,     
burning, and swelling of skin, burns, and other skin damage
Swallowing     Swallowing this material may be harmful or fatal.  Symptoms may     
include severe stomach and intestinal irritation (nausea,           
vomiting, diarrhea), abdominal pain, and vomiting of blood.         
Swallowing this material may cause burns and destroy tissue in the  
mouth, throat, and digestive tract.  Low blood pressure and shock   
may occur as a result of severe tissue injury.
Inhalation It is possible to breathe this material under certain conditions    
of handling and use (for example, during heating, spraying, or      
stirring).  Breathing this material may be harmful or fatal.        
Symptoms may include severe irritation and burns to the nose,       
throat, and respiratory tract.
Symptoms of Exposure  No Data
Target Organ Effects No Data
Developmental Information No Data
Cancer Information No Data
Other Health Effects No Data

                                          
Primary Route(s) of Entry                                                
Inhalation, Skin contact, Eye contact

Eyes If material gets into the eyes, immediately flush eyes gently with 
water for at least 15 minutes while holding eyelids apart.  If symptoms develop as a result of vapor exposure, immediately move   
individual away from exposure and into fresh air before flushing as recommended above. Seek immediate medical attention..
Skin Immediately flush skin with water for at least 15 minutes while    
removing contaminated clothing and shoes.  Seek immediate medical  
attention.  Wash clothing before reuse and discard contaminated    
shoes.
Swallowing Seek immediate medical attention.  Do not induce vomiting.         
Vomiting will cause further damage to the mouth and throat.  If    
individual is conscious and alert, immediately rinse mouth with    
water and give milk or water to drink.  If possible, do not leave  
individual unattended
Inhalation If symptoms develop, immediately move individual away from         
exposure and into fresh air.  Seek immediate medical attention;    
keep person warm and quiet.  If person is not breathing, begin     
artificial respiration.  If breathing is difficult, administer     
oxygen.
Note to Physicians Preexisting disorders of the following organs (or organ systems)   
may be aggravated by exposure to this material:  skin, lung (for   
example, asthma-like conditions).

       

Flash Point Not applicable
Explosive Limit Not applicable 
Autoignition Temperature No data
Hazardous Products of Combustion May form:  acid vapors, nitrogen compounds. 
Fire and Explosion Hazards No data
Extinguishing Media water fog.
 Fire Fighting Instructions Wear a self-contained breathing apparatus with a full facepiece    
operated in the positive pressure demand mode with appropriate     
turn-out gear and chemical resistant personal protective           
equipment.  Refer to the personal protective equipment section of  
this MSDS.
NFPA Rating Health – 3, Flammability – 0, Reactivity – 0

Small Spill Cover the contaminated surface with sodium bicarbonate or a soda   
ash/flaked lime mixture (50-50). Mix and add water if necessary to 
form a slurry.  Scoop up slurry and wash site with soda ash        
solution.Proper mixing procedures are essential.  Trained        
personnel should conduct this procedure.Untrained personnel      
should be removed from the spill area.
Large Spill Eliminate all ignition sources (flares, flames including pilot     
lights, electrical sparks). Persons not wearing protective         
equipment should be excluded from area of spill until clean-up has 
been completed. Stop spill at source. Prevent from entering        
drains, sewers, streams or other bodies of water.  Prevent from    
spreading.  If runoff occurs, notify authorities as required.      
Pump or vacuum transfer spilled product to clean containers for    
recovery.  Absorb unrecoverable product. Transfer contaminated     
absorbent, soil and other materials to containers for disposal.

   

Handling Containers of this material may be hazardous when emptied.  Since emptied containers retain product residues (vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be     observed.  Addition to water releases heat which can result in violent boiling and spattering.  Always add slowly and in small amounts.  Never use hot water.  Never add water to acids.  Always   add acids to water.

Eye Protection Chemical splash goggles and face shield (8″ min.) in compliance    
with OSHA regulations are advised; however, OSHA regulations also  
permit other type safety glasses. (Consult your industrial         
hygienist.)
Skin Protection Wear resistant gloves such as:  neoprene, polyvinyl chloride, To    
prevent skin contact, wear impervious clothing and boots..
Respiratory Protections If workplace exposure limit(s) of product or any component is      
exceeded (see exposure guidelines), a NIOSH/MSHA approved air      
supplied respirator is advised in absence of proper environmental  
control.  OSHA regulations also permit other NIOSH/MSHA            
respirators (negative pressure type) under specified conditions    
(see your industrial hygienist).  Engineering or administrative    
controls should be implemented to reduce exposure.
Engineering Controls Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below TLV(s).  
Exposure Guidelines Component  NITRIC ACID (7697-37-2)
OSHA VPEL 2.000 ppm – TWA
OSHA VPEL 4.000 ppm – STEL
ACGIH TLV 2.000 ppm – TWA
ACGIH TLV 4.000 ppm – STEL
WATER (7732-18-5)
No exposure limits established

Boiling Point  (for product) 185.0 F (85.0 C) @ 760 mmHg
Vapor Pressure   (for product) 51.000 mmHg @ 77.00 F
Specific Vapor Density  2.200 @ AIR=1 
Specific Gravity 1.424 @ 77.00 F
Liquid Density  11.850 lbs/gal @ 77.00 F                                            
1.424 kg/l @ 25.00 C
Percent Volatiles 100.0     %    
Evaporation Rate SLOWER THAN ETHYL ETHER
Appearance  No data
State  LIQUID 
Physical Form HOMOGENEOUS SOLUTION
Color  CLEAR,YEL-RED-BRN, ACRID ODOR
Odor   No data
pH No data

Hazardous Polymerization Product will not undergo hazardous polymerization.
Hazardous Decomposition May form:  acid vapors, nitrogen compounds.
Chemical Stability Stable.
Incompatibility  Avoid contact with:  organic materials, reducing agents, strong alkalies, Acid reacts with most metals to release hydrogen gas which can form explosive mixtures with air.. 

No Data 

No Data

Waste Management Information                                             
Collect and add slowly to large volume of agitated solution of      
soda ash and slaked lime. Add neutralized solution to excess        
running water in accordance with applicable regulations.                                                    

DOT Information – 49 CFR 172.101                                         
DOT Description:                                                    
NITRIC ACID, RED FUMING – HAZARD ZONE B,8,UN2032,I             
Container/Mode:                                                     
55 GAL DRUM/TRUCK PACKAGE                                      
NOS Component:                                                      
None                                                           
RQ (Reportable Quantity) – 49 CFR 172.101                                
Product Quantity (lbs) Component                                    
1064        NITRIC ACID

US Federal Regulations                                                   
TSCA (Toxic Substances Control Act) Status                          
TSCA (UNITED STATES) The intentional ingredients of this       
product are listed.                                            
CERCLA RQ – 40 CFR 302.4(a)                                         
Component RQ (lbs)
NITRIC ACID 1000             
CERCLA RQ – 40 CFR 302.4(b) 

Product label

X

Request for Quote and Get Heavy Discount on Price