Hematite

Product Description

HEMATITE is a high density weighting material. The hematite ore used as a weighting agent in drilling fluids has a mica like crystal structure
ground to a particle size suitable for use in drilling fluids.

Product Technical bulletin

Description :

HEMATITE is a high density weighting material. The hematite ore used as a weighting agent in drilling fluids has a mica like crystal structure
ground to a particle size suitable for use in drilling fluids.

Application and Use :

Hematite is applicable in all types of drilling fluids, including freshwater, seawater and oil-base muds. It can be used to increase the density of all drilling and completion fluids to 25 lb/gal (3.0 SG).Hematite is most frequently used in high-density, oil-base muds. Fluids weighted with Hematite contain fewer solids by volume than those weighted with barite, making higher mud weights possible. It is especially useful in high-density kill fluids.

The quantity of  Hematite required can be calculated using the following formula:

                               1,750 (w2- w1)      

Hematite  , lb/bbl= ———————-

                               41.66 –  w2

Where:

w1= Initial mud weight in lb/gal

w2= Desired mud weight in lb/ga

                                 5,000 (w2- w1)

Hematite, kg/m3 = ————————-
                                     5.0 – w2

Where:

w1= Initial mud weight in specific gravity

w2= Desired mud weight in specific gravity

Physical Properties :

Physical appearance  : Dry – red to brown powder
Particle hardness        : 5 – 6 MOHS scale (1-10)
Bulk density                   :143 lb/ft3 (2,291 kg/m3)
Specific gravity              : 5.0
Particle size                   :<1.5% wt >200 mesh (75 micron)
                                         :<15% wt ~325 mesh (>45 micron)
                                         :<15% wt <6 micron
Soluble hardness        :<100 mg/kg

Advantage :

• Muds contain fewer solids than similar-density barite muds due to the 20% higher specific gravity
• Muds have improved rheological values; generally plastic viscosities are 2 to 30% less than barite muds.
• Use of muds usually results in higher rates of penetration.
• Higher bulk density than barite, consequently more weight is held in the same volume bulk tanks and a smaller volume must be

transported to the wellsite.

• Less Hematitethan barite isrequired to achieve the same mud weight, reducing mud costs.
• Has a narrower particle size distri-bution with a larger average particle size as compared to barite.
• A harder mineral than barite, thus more resistant to particle-size degradation.
• Approximately 97% acid-soluble in 15% hydrochloric acid (HCl).Will partially scavenge hydrogensulfide at neutral and low pH levels and

regarded as a secondary sulfide scavengerWhen Hematite is used in H2S areas, a high pH should be maintained and an appropriate primary scavenger, should be used.

• May be environmentally preferred to barite in certain locations

Product label