Fish Oil Turpentines Cleaner

Product Description

Perfumed oils in water Neutralizer / Deodorizer for use after the carriage of FISH OIL eliminating unpleasant smells and odors from tanks previously carrying heavily smelling cargoes (for example fish oils or turpentines).  .  One liter of product RXSOL-20-2042-210 will neutralize one liter of FISH OIL.  This  will also remove trace hydrocarbons and help to improve permanganate times.

Biodegradable and water Rinseable.

Product Technical bulletin

Neutralizer / Deodorizer for use after the carriage of FISH OIL .  One liter of product RXSOL-20-2042-210 will neutralize one liter of FISH OIL.  This  will also remove trace hydrocarbons and help to improve permanganate times.

Biodegradable and water Rinseable.

RXSOL-20-2042-210   ( NEUTRALIZER / DEODORIZER ) Biodegradable and water Rinseable

Spraying – no
Injection – no

 Re-circulation – Make a 5% solution with fresh water in the tank, heating the mixture to 50 ^oC and re-circulate through betterworth machines for at least 3 hours, after which betterworth the tank for at least 3 hours with 50 ^oC sea water, followed by one hour at 85^oC.  Check during final washing at the pump stack drain for smell.  Fresh water rinse and blow dry.  If there are other Acrylate tank, then make an adequate amount of solution at the beginning for transfer between tanks, “spiking” the solution at each tank with additional RXSOL-20-2042-210(150 liters).

• Use a strainer at the pump stack when circulating any solution.

          Tank Lining – Stainless / Zinc / Epoxy / Phenolic
 

Fish Oil (2nd cleaning procedure)

Fish oil should never be washed hot (varnish formation) Fish oil is an oxidizing oil and through reaction with oxygen  the atmosphere it dries and hardens.Tank cleaning should be executed as soon as possible after discharge. Avoid higher temperatures (e.g. steaming) and heated cargoes in adjacent tanks.

1. Butter   worth  the  tank 2   hours   with   cold/ambient   (max. 30°C.)
    seawater and pump the waste  water without  any  delay  continuously
    out. Check if the tank is free of sediments  before  starting  to clean as
    per step 2 and 3.

2. Flush the tank and line system shortly with fresh water to  remove  the 
    sea water residues .

3. Prepare the following cleaning solution in fresh water.

• 0.4% RXSOL CTC-VOLC or alternatively .
• 0.4% RXSOL CTC-VOLC .
• 2.5% Sodium or Potassium Hydroxide .
• 5% P3 RXSOL-20-2042-210 Butter worth the tank 2.0 hour by recirculation. If Caustic is used the cleaning temperature should be not higher than 60°C. 

4. Butter worth the tank 1 hour with hot seawater (70- 80°C). 

5. Flush the tank with fresh water.

6. Ventilate, mop and dry the tank .

Product label