All Purpose Cleaner Ammoniated 210 Ltr

Product Description

Ammoniated powerful alkaline buffer cleaner containing an exceptional solvency power on soiled & oily matter which works on all washable surfaces. This specialized product is playing more effective role then Aquatuff. 
 

Product Technical bulletin

All Purpose Cleaner Ammoniated

RXSOL-16-1038-210

The Importance of RXSOL-16-1038-210 by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply usingRXSOL-16-1038-210 in correct dosages. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method:

The wash down begins, the chemicals penetrate & thoroughly moistens dirt & other grime. During wash down, the RXSOL-16-1038-210 thoroughly dissolves the particles of dirt, even oil and fat, in the water spray and thus achieves optimal cleaning results. In addition to being more effective, the use of RXSOL-16-1038-210  substantially reduces the time required for the Cleaning operation, as well as preventing dirt from reforming on the surface. The use of RXSOL-16-1038-210 incorrect dosages is half the job done.

3 Pieces of Good Advice Apply
RXSOL-16-1038-210 on the dry surface where possible! A dry surface will absorb far better than a wet surface. When applying RXSOL-16-1038-210 on vertical surfaces: Start application from the bottom and work upwards! If beginning from the top and going downwards, the RXSOL-16-1038-210 may produce “channels” down the surface, thereby running too fast off the surface. During high pressure cleaning: It is important that the rinsing water does not run over non-cleaned surfaces! The rinsing water can draw soap from the surface if running over non-cleaned surfaces. High pressure together with the optimum concentration of RXSOL-16-1038-210 will give the best effect.

Product Description:-

RXSOL-16-1038-210 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals. This product have an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents , Biodegradable and minimizes the extreme hazards to personnel in handling materials. Applications RXSOL-16-1038-210 Suitable for cleaning engine components like fuel and Lube oil filters, Injection nozzles, pump components, inlet and exhaust valves & primarily refers to cleaning of hard surfaces, such as Decks, Tanks, Engine-rooms, etc. can be used for all types of cleaning and degreasing and may be applied by brush, handspray, high and low pressure washing machines etc. Directions for Use and Dose Rates General Cleaning
RXSOL-16-1038-210 can be used for all types of cleaning & degreasing & may be applied by Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30 min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours. If the cleaning solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated. Depending on degree of contamination
RXSOL-16-1038-210 should be mixed with warm water at a rate of 50-200 ml per 10 litres. i.e. 1 cup of RXSOL-16-1038-210 to a bucket of water.RXSOL-16-1038-210  solution can be applied simply by mops, brushes or rags, or by dipping the soiled articles into the RxRXSOL-15-1501-tech  solution. After cleaning, rinse off with cold or warm water. Due to high foaming properties, RXSOL-16-1038-210 is not recommended for washing machines.

Tank Cleaning Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes & Soot from inert gas systems.

Method of Application and Dose Rates:-
1. Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%).
2. Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).
3. Spot cleaning. Hand spray neat or diluted on parts and surface to clean and leave for several minutes before rinsing off with clean water. 

NOTE :-
Whenever possible, the cleaning solution should be heated to 60-80°C. If this method is not possible, other conventional methods such as separate rate direct injection, recirulation or hand spraying provide acceptable options. For boiler fire side cleaning, a 10-20 % hot solution, (temp. above 40°C), should be sprayed on to the surfaces to be cleaned. Allow to penetrate for 20 minutes and flush off. For deposits which are very hard to remove, increase the concentration to 50% and repeat if necessary 

PRODUCT PROPERTIES:-

Characteristics:-
• Removes grease, oil, carbon deposits, soil and grime.
• Keeps loosened deposits in suspension preventing re-deposition.
• Low toxic. • Biodegradable.
• Non-flammable.
• Free from hydrocarbon solvents.
• Effective and economical in use
• Water-based cleaner.
• RXSOL-16-1038-210 has numerous cleaning applications including removal of greases, waxes,
  oil, sludge, soot, carbon deposits and general dirt and grime.
• Non-corrosive to ferrous metals.
• Suitable for all tank-coatings.
• Contains wetting agents.
• Leaves surfaces residue free. 

Product label
The Importance of RXSOL-16-1501- AM by High-Pressure Cleaning The job of high pressure cleaning can be done easier & quicker by simply using RXSOL-16-1501- AM in correct dosa -ges. Using a high pressure cleaner alone, without any CLEANER, will not achieve optimal cleaning results High-pressure cleaning primarily refers to cleaning of Hard surfaces, such as Decks, Tanks, Engine-rooms, etc. and in the majority of cases the cleaning is done according to the so-called two-step method: