Skip to main content
Home / Products / Asphalt Release / Asphalt Release Agent RXSOL

Asphalt Release Agent RXSOL

Asphalt Release Agent RXSOL
Asphalt Release
Product code  RXSOL-90-4162-210

Asphalt Release Agent is a completely biodegradable lubricant

Same-day UAE delivery Bulk & custom packaging Technical support included

Product Description

Asphalt Release Agent RXSOL is a completely biodegradable lubricant. The non-hazardous, water soluble mixable agent is designed to provide clean rapid and easy separation of bituminous (asphalt) materials from beds of dump trucks and haul trucks. This product is classified as Non Stick Biodegradable Agent for Asphalt.

A solvent-free, concentrated, water-based foaming asphalt release agent for use on asphalt-hauling trucks and other equipment used to handle asphalt.

Application & Usage

Prevents buildup of asphalt in truck beds.

Use as a slip coating on floor, walls, and tailgate of asphalt trucks and equipment to prevent adhesion of asphalt. Especially useful for: Building Contractors, Equipment Rental & Leasing Highway Paving Contractors

Dosage

Can be used in automated spray systems. It can be diluted with water at a ratio of 1:1 or up to 8 : 1. It can also be used in concentrated form as a cleaner for asphalt tools and equipment.
 

Once applied to the truck bed, a micro-thin film spreads out across the truck bed. This film creates a negative electrostatic charge on both the surface of the truck bed and the asphalt. This causes electrostatic repulsions preventing the asphalt from sticking to the surface of the truck bed.

Usually three hauls can be made before another application is required. Other Asphalt release agents require an application for each load. This product, Asphalt Release Agent Rx only requires repeated applications if hauling SMA or other polymer type mixes.

 

DIRECTIONS for better Asphalt Release from Truck Beds

Parameter

Instructions

Application Method

Apply Zep Asphalt Release Agent/R-6690 using a Zep Model 294DM Foamer or a Zep Foam Cannon.

Dilution Ratio

1 part product to 7-10 parts water.

Water Pressure

Suggested foamer setting: 40-80 PSI water pressure.

Air Pressure

Air pressure should be set approximately 10 PSI higher than water pressure to produce a proper, stable foam.

Application

Apply a single layer of foam to truck walls, floors, and tailgates.

Precaution

DO NOT overspray.

Equipment Cleaning

Coat other equipment surfaces in a similar manner to aid in clean-up.

Technical Specifications

 
Appearance  : Clear Pale Straw Viscous Liquid
Odour  : Glycol Ether Odour 
pH 1% Soln.  : 7
Boiling Point  : > 212F
Specific Gravity  : 0.96 g/ml
Viscosity  : 10 cps
Solubility in Water  : Complete
Misc. Physical Data  : NA
 

Notes

Features & Benefits :

  • Completely biodegradable thus minimizes environmental concerns.
  • Usually, three hauls can be made before another application is required.
  • Can be safely used with all types of asphalt mixes.
  • No liability issues
  • Does not iratate skin during contact
  • Non-carcinogenic
  • Safe on glass, wood and all metal surfaces
  • Works Great on cold-mix used by cities and counties for repair projects.
  • Effective on drag slats, rubber tire and steel rollers, pavers, patching machines and hand tools.
  • Soy based
  • Flash point is greater than 300 degrees F.
  • Non-toxic
  • Biodegradable
  • Effective on all polymer type asphalt mixes.

Packing Sizes

25 Ltrs, 210 Ltrs

Material Safety Data Sheet (MSDS)

Product Name

Asphalt Release Agent

Part Number RXSOL-90-4162-210

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

 

Phone 91 22 65113333 / 5555 / 9999 /
Fax 91 22 2781 1318
Email mail@rxmarine.com

 

Chemical Name

Concentration

CAS Number

EC Number

R Phrases

 

2-Butoxyethanol

1-5

111-76-2

203-905-0

36

 

Proprietory Water Soluble Polymer

30-35

-----------

----------

---

 

Other Ingidents are not classified as hazardous

 

Odour

Glycol Ether.

Appearance

Liquid, pale yellow, soluble in water.

Contact with eyes

Risk of  damage to eyes (R41).

Contact with skin

Repeated exposure may cause skin dryness or cracking .Mildly irritating to skin.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

Ingestion

The ingestion of significant quantities may cause gastro-intestinal disturbances.


 

Contact with skin

Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water

Contact with eyes

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Seek medical advice

Ingestion

Never give anything by mouth to an unconscious person.Give plenty of water to drink Seek medical advice if necessary

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract Remove patient to fresh air

General

In case of accident or if you feel unwell, seek medical advice immediately .

Flash Point: ---------------------- >200f
Fire Point: ------------------------ N/A
Extinguishing Media: Water Spray Or Mist, Co2, Drychemical Foam.
Special Fire Fighting Procedures: Wear Self Contained Breathing Apparatus With Full Facepiece
Operated In Pressure Demand Or Other Positive Displacement Mode.


 

Personal Precautions

Wear protective clothing as per section 8.

Environmental Precautions

No special precautions are required for this product.

Immediate Actions

Shut off source of leak if safe to do so.

Clean Up Actions

Absorb spillage in suitable inert material.

 

Flush spill area with copious amounts of water.

Special Precautions

 Not Require

 

Handling

The usual precautions for handling chemicals

Storage

Keep only in the original container in a cool, well ventilated place Protect from direct sunlight.

 

Exposure Limits

There are no recommended or established controls for this product

Exposure controls

No special ventilation is required unless the product is used in a spray form and covered area.

Occupational exposure controls

No respiratory protection is required unless subject to contact with substance mist Wear suitable protective clothing, including eye/face protection and gloves(plastic or rubber are.recommended)

 

Appearance : Clear Pale Straw Liquid
Odour : Glycol Ether Odour
pH 1% Soln. : 6-9
Boiling Point : > 212F
Specific Gravity : 0.96 g/ml
Viscosity : 10 cps
Solubility in Water : Complete White Emulsion
Misc. Physical Data : NA

- This article is considered stable under normal conditions, No hazardous reactions known if used for its intended purpose


 

Toxicological information

No experimental data available.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

Contact with skin

In cases of severe exposure, irritation may develop.

Contact with eyes

Causes irritation.

 

Can cause damage to the eyes.

Ingestion

The ingestion of significant quantities may cause gastro-intestinal disturbances.

Carcinogenicity

No evidence of carcinogenic effects.

 

Ecotoxicity

This cleaning agent consists of readily biodegradable surfactants, all of which have only slight or moderate tocixity.

Mobility

Completely soluble in water

Persistence and Biodegradability

The components in this product are readily biodegradable.

Bioaccumulation Potential

Bioaccumulation of the components in this product is insignificant.

Other Adverse Effects

Presents little or no hazard to the environment

 

Classification

EU Waste class: -

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point Disposal should be in accordance with local, state or national legislation

- Not classified as hazardous for transport

 

Risk Phrases

Risk of  damage to eyes if direct contact.

Safety Phrases

In case of contact with eyes, rinse immediately with plenty of water and seek medical advice .Wear suitable gloves and eye/face protection .

The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall Rx Marine International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Supply Locations

Asphalt Release Agent Rx manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Asphalt Release Agent Rx at a competitive price from us. We have ready stock of Asphalt Release Agent Rx in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.

Need pricing or a bulk quote?

Send us the product and quantity — our team replies with a quote same day.

WhatsApp Us