Sharjah Chemicals is leading Supplier and Manufacturer of COAL REMOVER rx hold 210 Ltr in Sharjah UAE, Al Qusais, Deira, Saif Zone, Fujairah,Dubai, Abudhabi, Ajman, Diera, UAE Middle East, Al Quoz, Jebel Ali, Umm Al Quwain, Ras Al Khaimah, Masafi, Khor Fakkan, Al Hayl, Al Ain, Ras Al Khor Industrial Area, Al khubaisi, Umm Ramool Industrial Area, Al Qusais Industrial Area, Jebel Ali.
Product Information:
COAL REMOVER rx hold 210 Ltr : RXSOL-22-2215-210
A powerful penetrating mixed chemical products to remove heavy coal deposits. Additionally, it may also be used to remove mineral deposits and eliminate bad odors in tanks and other closed systems.
It is free from hydrocarbon solvents, non flammable and biodegradable.
Biodegradable / Non-Toxic / Non-Pollutant.
VERY Cost effective.
Recommended to use spray equipment.
The use of hot water will greatly enhance the effectiveness of the cleaning and should be utilized whenever possible.
Product Application:
- Use cold – no heating required.
- Easily dissolves deposits containing carbon , polymer resin etc.
- Economical to use.
- Scraping not required.
- Non- flammable.
- Helpful for burner tips, fuel injectors and all components fouled by carbon, resin or varnishes.
- Cleans oil side of fuel heaters, oil coolers, etc.
- Can be used for cleaning of : -Fuel Oil Filters – Pistons – Piston rings – Valve cage
- Cleaning time will vary depending on the extract nature and thickness of deposit to be removal.
- Stubborn deposits should be scrubbed to assist the cleaning operation.
- Your local Rx CLEANSERS representative will work with you to design the optimum concentration & procedure for your system.
- RXSOL-22-2201 should be mixed with fresh water to form a solution of 10-30%, depending on the extent of scaling. After using RXSOL-22-2201 it is essential to thoroughly rinse all metal surfaces at least once with a 0.5% solution of Alkalinity Control in fresh water. This solution should be circulated for 2-4 hours or until an acceptable pH value is obtained. This will neutralize any remaining acidity & passivate steel surfaces.
Leave a Reply