Of Marine Chemical Solutions
Of Marine Chemical Solutions
Tank Cleaner: Alkaline Cleaner, Tank Cleaner Heavy Duty, Bunker Cleaner, Metal Clean Bright, HCF remover, Rust Remover, Bilge Clean, Sea Power Clean, Veg Oil Cleaner, Enviro Clean, Bitumen Remover, Lead Cleaner, White Spirit And many more…http://sharjahchemical.com/product-category/tank-cleaner-20/
Degreaser: WorkShop Cleaner, Oil Grease Remover, Oil Spill Dispersant, Biosol, Alkaline Cleaner Safety, Solvent Cleaner, Ultrasonic Cleaner, Kitchen Cleaner And Many more…http://sharjahchemical.com/product-category/degreaser-10/
Drilling Fluids: Defoamer, Shale Inhibitor, Pour point Dispersant, Corrosion Inhibitor, Demulsifier, Flocculant, Fluid Loss Control, Reverse Demulsifer, Vanadium Inhibitor, Wax Dispersant, Mud Lubricant, Amines, Glycol, Anti Caking Agent, Cold Flow Improver and many more…http://sharjahchemical.com/product-category/drilling-fluids-mud-oil-field-chemicals-81/
Rigs Oil Field Chemicals: Rig Wash, Hydrazine Hydrate, Amine, Muriatic Acid, Oil Sludge Cleaner, Oil Spill Dispersant, Calcium Bromide, Soda Lime with Indicator, Premix Glycol Corrosion Inhibited and many more…http://sharjahchemical.com/product-category/rigs-oil-field-34/
Boiler Water Treatment Chemicals: Oxygen Scavenger, Hardness Control, Alkalinity control, Hydrazine, pH booster, Antiscalant, Scale Remover, Biocide and many more… http://sharjahchemical.com/product-category/boiler-chemicals-42/
Cooling Water Treatment Chemicals: Corrosion Inhibitor, Engine Water treatment Chemicals, Algae Control, Antifouling, Nitrite Borax Corrosion Inhibitor, Coagulant, Scale Remover and many more… http://sharjahchemical.com/product-category/cooling-water-chemical-43/
Sewage Treatment Chemicals: Cationic Anionic Flocculant, PAC, Sulfite, Emulsion Breaker, Ferric Chloride, Sodium Hypochlorite, Drainpipe Opener, Alum, Silicone and Many More…http://sharjahchemical.com/product-category/sewage-chemicals-treatment-40/
Swimming Pool Water Treat Chemicals, Reverse Osmosis RO CHEMICALS Membrane Cleaner.
Other Valuable Chemical Categories:::
Hand Wash / Personal care, Degreaser, Sewage Chemicals Treatment, Raw Chemicals, Detergent & Soap, Deck cabin galley Maintenance, Tank Cleaner, Test Kit For Water, Ship Hold Cleaning Solution, Asphalt Release, Lab Equipment, House / HOTEL & CATERING, Ballast Tank Chemicals, GREASES, Lab Chemical, Wall Wash Test Kit, Agriculture, Safety Item, Gasses, Fuel Oil Treatment Chemicals, Evaporator Treatment Chemicals, Construction Chem, Paint and Cleaning solvent, RO Chemicals, Water Filter Vessel Softener Accessory, Scale Remover, Floor Care Polish Cleaner, Oil Spill Chem & Absorbent, Swimming Pool & Spa Treatment Chemicals, Automobiles, Drilling Fluids & Mud Oil Field chemicals, RIGS Oil Field cleaning and maintenance chemicals, Railway Maintenance, Air Lines, Power Plant / Heavy Industries, Metal Treatment, Foundry Ind Chemicals, Passivation, Clean Air deodorizer, Stains Indicator Reagents, Carbon Coal Charcoal, Coolant Glycol Antifreeze, Rust Clean & Protect, Drain Clean Products, Electrical Cleaner, Engine room Maintenance, Laundry Chemicals, Radiator and AC coil cleaner, Boiler Chemicals, Cooling Water Chemical, Corrosion Inhibitor, Rubber Chemicals, Poultry Feed Chemicals, Food Additive, Pest Control
Water hardness is formed by the calcium and magnesium content of the water. Sea water has a very high water hardness. Some products like fatty acids and vegetable oils with a high free fatty acid content will form white sticky residues, if they are cleaned with a water of a high water hardness (e.g. sea water)
Drying and semi-drying vegetable and animal oils react with oxygen to form a varnish-like polymeric film. This is very difficult to remove from the bulkheads etc. Since heat increases the reaction speed the initial washing of these products must be done with water at ambient temperature without any delay after unloading the cargo.
Evaporation of volatile substances Cargoes consisting of mixtures with different vapor pressures should neither be cleaned by evaporation, nor prewashed hot. The evaporation of the light substances from a mixture could result in non-volatile residues, which are very difficult to remove.
The initial wash of products that tend to polymerized should be carried out with cold (ambient) water. Washing with hot water may result in polymeric residues being left in tanks and lines, which are very difficult to remove.
Request for Quote and Get Heavy Discount on Price
