Of Marine Chemical Solutions
Of Marine Chemical Solutions
Its rapid evaporation rate enables it to be used for cleaning and decreasing of electrical equipment,motor winding etc.
25.00Ltr.
Electrical Parts Cleaner CRC Quick Dry Electronic Cleaner. Also used as specialist Electrical Contact Cleaner and Electric Motor Contact Cleaner. its ffective degreasing action with fast evaporation and no residue effect makes no1 choice among our end user customer. The non-flammable property is designed for energized equipment ans use on energized electric motors, fusible disconnects, switchgears, transformers, circuits, insulators, relays, and switches.
Its other brand name is CRC Lectra-Motive Electric Parts Cleaner, Electrical Parts Cleaner – CRC, CR QD Electronic Cleaner,
RXSOL-16-1009-025 is a well balanced blend of non – chlorinated degresol ( having super digressing power ) with surfactants. Its rapid evaporation rate enables it to be used for cleaning and decreasing of electrical equipment,motor winding etc.
It is economical to use and can be applied on large motors, generators, and electrical apparatus, as well as smaller equipment.
It is highly effective for the cleaning of electric motors and switch gear on printing presses, meta components. RXSOL-16-1009-025 greatly reduces the toxic dangers of hazardous solvents like trichloroethylene and carbon tetrachloride, solvents that are banned by many leading industries.
Product Technical bulletin
Excellent Cleaner for Electric Parts
Electrosol Quick Dry Ltr (RXSOL-16-1009-025)
Introduction: A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaningand Degreasing of electrical equipment.It provides immediate and efficient removal with a high evaporation rate.
Procedure of Use : RXSOL-16-1009-025 must be used in open or sufficiently ventilated areas. RXSOL-16-1009-025 should always be used concentrate (without mixing with other solvent.) For best results apply with either by brush, swab,or as a fine spray using suitable hand held spray equipment. Small components may be cleaned by brief immersion in a bath of RXSOL-16-1009-025.Never use RXSOL-16-1009-025 on a running generator or motor. Rxsol-RXSOL-16-1009-025 can be used to clean virtually all electrical equipment & components although is it possible it may affect some types of rubber & plastic. Either remove rubber & plastic parts from component or test on small area for any reaction before cleaning.
It is economical to use and can be applied on large motors, generators, and electrical apparatus, as well as smaller equipment
A few minutes soaking is usually sufficient to loosen and disperse most oily deposits. For severely soiled parts or windings, RXSOL-16-1009-025 cleaner may be allowed to soak into the deposits for up to two hours.
Product Properties:
Appearance | Clear Colourless Liquid | Vapor Density Heavier than air |
Flash Point | 63°C (Closed Cup) |
Stability : Very stable understandard, normal conditions |
Compatibility | ||
Metal Plastic Rubber |
No known effect No Known effect May swell |
Note: After use the product must always be well sealed in the drum. |
Packaging | Order No.: | Size (in kgs./lts.) |
RXSOL-16-1009-025 | 7/25 Lts |
Characteristics:
. High dissolving and penetration action.
. Excellent degreasing and emulsification power .
. Safe on applied electrical insulation.
. Non-corrosive .It is safe to use on painted or varnished metal surfaces.
. Without chlorinated solvents.
. To be used as an alternative to conventional electric cleaners
Classification
Description | Concentration | Product no. |
Electrosol -PLU | 95 – 98 % | RXSOL-MC-1009A |
Electrosol -QD (QUICK D | 93 – 98% | RXSOL-MC-1009B |
Electrosol -Non Flamable | 97 – 99 % | RXSOL-MC-1009C |
Product label
A well balanced blend of non-chlorinated degresol ( Having super Degreasing power ) with surfactants which eliminates Quick evaporation rate and resulting for Cleaning and Degreasing of electrical equipment.It provides immediate and efficient removal with a high evaporation rate. It is economical to use and can be applied on large motors, generators, and electrical apparatus, as well as smaller equipment.
Request for Quote and Get Heavy Discount on Price